Klik hier buy Nazgula5 V2 in Grey Tpu Parts Version.
Opmerking:
Kennisgeving:
Nieuwe versie Upgrade in BLITZ F7 V1.1 Flight Controller en BLITZ E45S 4in1 ESC.
| Nieuwe versie | Oude versie |
|
BLITZ F7 V1.1 Flight Controller ( Separate FC Link) MCU: STM32 F722 |
SucceX-E F7 Flight controller - MCU: STM32F22RET6 216MHz - Gyro: MPU6000 - OSD: IFLIGHT OSD （AT7456E) - BEC: 5V 2.5A - BlackBox: 16MB - Uart: 4*UART(UART1、UART2、UART4、UART5) - 4×Dshot/PWM outputs - Smartaudio & IRC Tramp VTX protocol supported - WS2812 led Strip: Ja - Bepper: Ja - Firmware: IFLIGHT_SUCCEX_E_F7 - Outer Size: 36*36mm / 30,5 * 30,5 / φ4 montage - Weight: 6.9g |
BLITZ E45S 4in1 ESC ( separate ESC Version om meer details te weten)Input oltage: 2-6S Firmware: QH-40 16.7 Continuous current: 45A Instantaneous current: 55A MCU:BB21 Current sensor: yes scale 200 Drive signal support: DShot150/300/600MultiShot.OneShot Weight: 15g |
SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC - Dimension: 40*43mm - Mounting Holes: 30.5*30.5mm/Φ3mm - Weight: 14.4g - Ondersteunt 2-6S Lipo-invoer - STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware - Stroomsensor: JA - BEC: NEE - Supports: DShot150/300/600/1200/MultiShot/OneShot etc.
- Target: G-H-30 BLS 16.7 |
Voor Caddx Ratel camera changed to RaceCam R1 Mini Cam.
( RaceCam R1 is hetzelfde als de Caddx Ratel camera, but changed the bren LOGO )
Frame Spare Part , Klik hier
PRODUCT BESCHRIJVING
Nazgul5 V2 is a 5' size BNF (Bind-en-Fly) quadcopter. het is updated XL5 V5 FPV frames. Pre-tuned en setup, everything you need is just bind-en-fly! Loads of power en smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Got a hard hit en snapped an arm? Don't worry, get some spares with your order en easy-swap out in field. Wanna strap your for GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!
Tips:
VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies en use our prepared Betaflight VTX tables according to your region.
Specificatie:
- BLITZ F7 & BLITZ E45S 45A flight stack
- XING-E 2207 FPV Motor （6S 1800KV )
- Wheelbase: 240mm*240mm
- Lichaamsgrootte: 170 * 170 mm
- Propellermaat: 5 inch /5,1 inch
- FC pattern: 30.5*30.5/20*20 mm
- FPV cam spacing: 19mm
- Weight: 393.4g (without battery)
SucceX Force 5.8g 800mW VTX Adjustable |
- Item: SucceX-Force 800mW adjustable VTX - Ingangsspanning: - Output voltage/ Max current: 5V 1A - 12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@200mW，250mA@500mW, 380mA@800mW - Output 48 frequency points, - PIT/25mW/200mW/400mW/800mW |
|
Functie:
- 5 mm armontwerp voor meer duurzaamheid
- Easy-Swap arms
- LED illuminated Logo
- XING-E 2207 motors en NAZGUL 5140 props
- 5 "-versie past ook op schroeven van 5,1" -stijl
- Popular True-X configuration
- TPU crash-guards
- Fits both 30.5x en 20x stacks
Pakket Inbegrepen:
- 1x Nazgul5 V2 240mm 5 Inch 6S FPV Racing-drone
- 1x RaceCam R1, 2.1mm lens 19x19mm camera
- 1x Albatross RHCP SMA 5.8g antenne
- 2sets x Nazgul 5 inch 3-blades (Set of 4 - Color may vary)
- 1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
- 1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)
Aanvullende voorgestelde onderdelen (niet inbegrepen)
- Battery 6S 1300mAh
- Camera mount for GoPro
No need to worry! All Factory Dumps en Wiring Diagrams can be found on our Google Drive: KOPPELING
